- Manuals & Guides
Features for the JENSEN AM/FM/CD/USB/iPod & SiriusXM Satellite Ready Under Cabinet Stereo System
- 160 Watts
- Electronic AM/FM tuner (US/Euro selectable)
- 24 station presets (6AM/18FM)
- Front panel AUX-In
- iPod/iPhone ready through front USB jack
- SiriusXM Satellite Radio Ready (requires SXV100 tuner)
- CD player (DC-DA, DC-R/W, MP3, WMA compatible)
- USB input allows full iPod interface as well as playback of MP3/WMA files from compatible flash drives
- Fixed front panel
- Wired Remote Ready (MWR75 and MWR100)
- Positive LCD Display
- Preamp Line Level Output
- 40 Seconds of Electronic CD Skip Protection
- Conformal Coated PCB
- ASTM B117 Salt Spray Exposure Standard Compliant
- ASTM D4329 UV Exposure Standard Compliant
- Low Battery Audible Warning - A low voltage audible warning will alert you when voltage is low. Station presets and Marine Stereo settings are written to a memory chip and maintained when power feed is disconnected.
- SiriusXM Satellite Radio Ready - Enjoy over 120 channels of the best commercial-free music, sports, information and entertainment, with 65 channels of 100% commercial-free music, and 55 channels of world-class sports, news, talk, entertainment, traffic and weather.
NOTE: Separate SIRIUS Satellite tuner and SIRIUS Satellite subscription are required to receive a SIRIUS Satellite signal. Each sold separately.
To subscribe to the SIRIUS service call toll-free at 1-888-539-SIRIUS
or click here to visit their website.
- Full iPod/iPhone Controls - When you plug your iPod or iPhone into your new Marine Stereo you can fully control the iPod or iPhone using the stereo controls - no need to fumble around with your iPod or iPhone while boating; now it can stay protected and out of the way.
NOTE: JDABIPDL iPod Adapter Cable required. Sold separately.
*iPod Compatibility Information: Please refer to this guide to see if your
iPod or iPhone is compatible with our JENSEN iPod Ready Stereos.
Not sure which iPod model you have? Click here to find out.
Specifications for the JENSEN AM/FM/CD/USB/iPod & SiriusXM Satellite Ready Under Cabinet Stereo System
|Maximum Power Output (Watts x Channel)
||40W x 4|
|Signal-to-Noise Ratio @ 1Watt/4 Ohms (dB)
|Mounting Hole Dimensions (Inches WxH)
|Mounting Depth (Inches)
|Watertight Standard Compliant
|Conformal Coated PCB
|Plastic PCB Insulator
|GEN 3 Sirius Satellite Radio Ready
|SiriusXM Satellite Radio Ready
|Wired Remote Control Ready
|Wireless Remote Control Ready
|Positive LCD Display
|Selectable AM/FM Frequency Spacing US/European
|1GB Onboard Memory
|Auxiliary Audio Input
|Preamp Line Level Outputs
|Electronic Disc Skip Protection (Seconds)
|Radio Broadcast Data System Text Display
|Non-Volatile Memory for Presets & User Settings 2-Wire Power (Access ACC, GND)
|NOAA Weatherband/Weather Alert
|ASTM B117 Salt Spray Exposure Standard Compliant
|ASTM D4329 UV Exposure Standard Compliant
Manuals & Guides for the JENSEN AM/FM/CD/USB/iPod & SiriusXM Satellite Ready Under Cabinet Stereo System
Our hands on Engineering Research and Development team builds quality into our JENSEN Marine products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Marine Audio & Video products offer MORE durability and performance than you would expect from standard electronics.
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
UV/Salt Fog Corrosive Exposure Chamber
Exterior components are subjected to accelerated UV exposure that equates to 5-7 years of actual outdoor exposure to assure you that your electronics will look great for many years. In addition, product and product components are subjected to dry/wet cycles of highly corrosive fog/mist to test for corrosion resistance and corrosion protection effectiveness.
The last thing you need is for your radio to quit due to accidental static shock. That’s why our products go through the extensive Electrostatic Discharge Test on all exposed control areas as well as I/O connections so they can withstand the most severe static build up. Shocking, isn’t it?
Severe electrical environments are relatively common mobile applications. We understand these environments and what it takes to protect electronics that will be exposed to them. That’s why all of our products include specific and significant front-end circuit protection and filtering that is proven to withstand the toughest electrical environments. The Load Dump Tests puts destructive pulses (spikes) to simulate the sudden disconnection of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction ensuring that our electronics are protected.
DC Voltage Overstress
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
High/Low Storage Temperature
Used to ensure powered components withstand temperature fluctuations.
Subjects externally mounted products to high pressure water by blasting the product with 13,000 lbs. of water pressure as close as 6 inches to the product.
Pushbutton/Hinge/Mechanism Durability Cycle
Life cycle robotic testing of all buttons and hinge mechanism for durability.
RF Performance Testing
RF performance is central to the user experience for many of our products. The RF Performance test ensures that our products keep clean signals in and the bad signals out, so that users are always left with a steady signal without outside interference. We not only test for high level RF performance during product design, but we also take a random sampling from each production lot and test it to ensure performance consistency. A battery of over 80 performance tests are conducted to analyze and validate RF and audio performance.
Inductive Load Switching
Tests product well above and below the average waveform to ensure that it can withstand the extreme fluctuations.