- Features
- Specs
- Manuals & Guides
- Testing
- Reviews
- FAQ
- Media
Features for the JENSEN Waterproof AM/FM/iPod and SIRIUS Satellite Radio Ready Stereo
- AM/FM/iPod & SIRIUS Satellite Radio Ready Stereo with USB Input & 1GB of Onboard Memory
- 200 Watts
- USB Input supports MP3/WMA formats
- 1GB of Onboard Memory (250 Songs)
- Auxiliary Audio Input (RCA)
- Waterproof (IPX6 rated) Commander and Water Resistant AM/FM Tuner Amp.
- Wired Remote Ready (MWR75 and MWR100)
- Positive LCD Display
- Preamp Line Level Outputs
- Non-volatile memory for presets & user settings 2-wire power (ACC, GND)
- Conformal Coated PCB
- Plastic PCB Insulator
- Sealed Chassis
- ASTM B117 Salt Spray Exposure Standard Compliant
- ASTM D4329 UV Exposure Standard Compliant
- Overall Size of Commander Unit: 5.12"W x 3.7"H x 1.21"D
- Overall Size of Tuner/Amp Unit: 8.35"W x 7.97"D x 2.39"H
- Radio Broadcast Data System - Displays up to 5 lines of system text information when the selected FM station supports RBDS (Radio Broadcast Data System) service.
- Low Battery Audible Warning - A low voltage audible warning will alert you when voltage is low. Station presets and Marine Stereo settings are written to a memory chip and maintained when power feed is disconnected.
- Zero Current Memory Draw - This stereo does not require a constant battery standby power feed which means the stereo keeps station presets without running the battery down.
- Full iPod Controls - When you plug your iPod into your new Marine Stereo you can fully control the iPod using the stereo controls - no need to fumble around with your iPod while boating; now it can stay protected and out of the way.
NOTE: JIPDCBL12 iPod Adapter Cable required. Sold separately.
*iPod Compatibility Information: Please refer to this guide to see if your
iPod or iPhone is compatible with our JENSEN iPod Ready Stereos.
Not sure which iPod model you have? Click here to find out.
Generation 3.0 SIRIUS Technology: Allows a SIRIUS Dock & Play unit to act as the satellite radio receiver. This eliminates the need for a separate SIRIUS tuner box! Simply put the Dock &Play into its docking station and listen to SIRIUS radio with full functionality and control through the stereo head unit. It also means that your SIRIUS tunes are completely portable. Your favorite SIRIUS stations don't have to remain strictly in your equipment. Now you can take the SIRIUS Dock &Play unit out of your equipment and use it in your car and home, all under ONE single SIRIUS subscription! (not included). We know you just have to have this now, right? Check out the SDSV6V1 SIRIUS Dock & Play Radio and Vehicle Kit!
NOTE: If you want to take advantage of the SIRIUS Satellite Radio Ready feature you will need:
- SIRIUS Satellite Radio Subscription
- DLP2500G3RTL - SIRIUS Satellite Gen 3.0 Receiver. Compatible with All Stereo Revisions.
- SRA25 - SIRIUS Satellite Antenna
To subscribe to the SIRIUS service call toll-free at 1-888-539-SIRIUS
or click here to visit their website.
Specifications for the JENSEN Waterproof AM/FM/iPod and SIRIUS Satellite Radio Ready Stereo
| Weight (Lbs) |
5 |
|---|---|
| Overall Dimensions |
5-1/8 x 3-3/4 |
| Maximum Power Output (Watts x Channel) |
50 x 4 |
| Signal-to-Noise Ratio @ 1Watt/4 Ohms (dB) |
N/A |
| Mounting Hole Dimensions (Inches WxH) |
3/4 |
| Mounting Depth (Inches) |
N/A |
| Watertight Standard Compliant |
Yes |
| Conformal Coated PCB |
Yes |
| Plastic PCB Insulator |
Yes |
| Chassis |
Sealed |
| iPod Ready |
Yes |
| Gen3.0 SIRIUS Satellite Radio Ready |
Yes |
| Wired Remote Control Ready |
Yes |
| Wireless Remote Control Ready |
Yes |
| Positive LCD Display |
No |
| CD/CD-R/CD-RW Playback |
No |
| MP3/WMA Playback |
No |
| AM/FM Tuner |
Yes |
| Selectable AM/FM Frequency Spacing US/European |
Yes |
| USB Input |
Yes |
| 1GB Onboard Memory |
Yes |
| Auxiliary Audio Input |
Yes |
| Preamp Line Level Outputs |
Yes |
| Electronic Disc Skip Protection (Seconds) |
N/A |
| Radio Broadcast Data System Text Display |
No |
| Non-Volatile Memory for Presets & User Settings 2-Wire Power (Access ACC, GND) |
Yes |
| NOAA Weatherband/Weather Alert |
No |
| ASTM B117 Salt Spray Exposure Standard Compliant |
Yes |
| ASTM D4329 UV Exposure Standard Compliant |
Yes |
Manuals & Guides for the JENSEN Waterproof AM/FM/iPod and SIRIUS Satellite Radio Ready Stereo
Product Downloads
 |
Commander Mounting Template (Size: 33.9 KB) | |
|
iPod Compatibility Guide (Size: 470.6 KB) | |
|
MSR2107 Commander Mounting Template (Size: 37.8 KB) | |
|
MSR2107 Owners Manual (Size: 7 MB) | |
|
What does iPod Ready Really Mean? (Size: 602.5 KB) | |
|
What does SIRIUS Satellite Radio Ready Really Mean? (Size: 758.7 KB) |
Troubleshooting Guides
|
MSR2107 Troubleshooting Guide (Size: 88.8 KB) |
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN Marine products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Marine Audio & Video products offer MORE durability and performance than you would expect from standard electronics.
Temperature/Vibration Chamber
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
UV/Salt Fog Corrosive Exposure Chamber
Exterior components are subjected to accelerated UV exposure that equates to 5-7 years of actual outdoor exposure to assure you that your electronics will look great for many years. In addition, product and product components are subjected to dry/wet cycles of highly corrosive fog/mist to test for corrosion resistance and corrosion protection effectiveness.
Electrostatic Discharge
The last thing you need is for your radio to quit due to accidental static shock. That’s why our products go through the extensive Electrostatic Discharge Test on all exposed control areas as well as I/O connections so they can withstand the most severe static build up. Shocking, isn’t it?
Load Dump
Severe electrical environments are relatively common mobile applications. We understand these environments and what it takes to protect electronics that will be exposed to them. That’s why all of our products include specific and significant front-end circuit protection and filtering that is proven to withstand the toughest electrical environments. The Load Dump Tests puts destructive pulses (spikes) to simulate the sudden disconnection of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction ensuring that our electronics are protected.
DC Voltage Overstress
Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products: Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.
Reverse Polarity
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
Shorted I/O
Ensures that product will function when inputs and outputs are connected improperly to the product.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
High/Low Storage Temperature
Ensures your JENSEN products will perform even after prolonged periods of storage with no power in extreme hot or cold temperatures.
Temperature Cycle
Used to ensure powered components withstand temperature fluctuations.
High-Pressure Spray
Subjects externally mounted products to high pressure water by blasting the product with 13,000 lbs. of water pressure as close as 6 inches to the product.
Pushbutton/Hinge/Mechanism Durability Cycle
Life cycle robotic testing of all buttons and hinge mechanism for durability.
RF Performance Testing
RF performance is central to the user experience for many of our products. The RF Performance test ensures that our products keep clean signals in and the bad signals out, so that users are always left with a steady signal without outside interference. We not only test for high level RF performance during product design, but we also take a random sampling from each production lot and test it to ensure performance consistency. A battery of over 80 performance tests are conducted to analyze and validate RF and audio performance.
Inductive Load Switching
Tests product well above and below the average waveform to ensure that it can withstand the extreme fluctuations.
Reviews for the JENSEN Waterproof AM/FM/iPod and SIRIUS Satellite Radio Ready Stereo
Customer Reviews
-
Love this stereo
Rating Easy to install, takes minimal space on dash, and no CD! Perfect for a boat especially since I can control my iPod!
-
Great Stereo!
Rating I have a very small dashboard on my Trophy boat for a stereo, and this model works perfect. Easy for my grand-kids to use, and I can figure it out too!
Product FAQs
-
Since SIRIUS and XM merged, can I use XM tuners in place of SIRIUS tuners?While SIRIUS and XM have merged, they operate different broadcasts and are separate services. The tuners are not interchangeable.
-
I have SIRIUS Marine Weather in my boat. Can I use that with my JENSEN Marine SIRIUS-ready radio?SIRIUS Weather is a separate service from SIRIUS Radio programming. These devices are not compatible with JENSEN Marine SIRIUS-ready radios in a Direct Connect fashion. JENSEN Marine SIRIUS-ready radios require a dedicated SIRIUS Radio tuner for Direct Connect capability. You may connect the audio out from your SIRIUS Marine Weather device to your JENSEN Marine radio's Auxiliary Input.
-
My radio is SIRIUS-ready. Where do I find the ESN#?The ESN# (SID#) is located on the SIRIUS tuner (sold separately). This # can be accessed through the radio's display when connected to the SIRIUS tuner. See the radio's manual for instructions.
-
My radio says it is SIRIUS-ready. Why can't I get SIRIUS to work?SIRIUS-ready radios require a separate SIRIUS tuner module and SIRIUS antenna as well as a subscriptoin to SIRIUS Satellite Radio service.
-
The radio has four speaker outputs, but I only have two speakers. Can I combine or "bridge" the four outputs into two for more power?It is not recommended to combine or "bridge" the outputs as damage will occur. Use only the Front or Rear pair and insulate the unused wires to prevent a short. Use of an external power amplifier is recommended for applications requiring more power.
Questions about the JENSEN Waterproof AM/FM/iPod and SIRIUS Satellite Radio Ready Stereo
Ask a Tech Expert Your Question:
-
Will the commander cover the hole made by the single DIN over-sized units? What is the actual size?From Guy at 6/11/10 10:26 AMThe JENSEN MSR2107 Marine Stereo Commander unit measures 5.15" W x 3.7" H x 1.2" D and does not fully cover the hole made by a single DIN stereo unit.
-
Is this stereo compatible with an iPod Touch 2nd generation?From Ryan at 6/4/10 1:49 PMPlease see iPod Compatibility Bulletin at the following link: http://www.jensenrvdirect.com/downloads/dl/file/id/365/ipod_compatibility_guide.pdf If you are not sure which iPod you have, use the following link to identify it: http://support.apple.com/kb/HT1353
-
How does the AM/FM tuner mount? Does it come with mounting brackets?From Dennis at 5/24/10 11:33 AMThe JENSEN MSR2107 modular stereo includes the mounting screws and standoffs to mount the tuner/amp module to the surface of your desired installation area.
-
Is this unit compatible with the Jensen powered subwoofer MXA6BA?From Steve at 5/23/10 7:09 PMThe JENSEN MSR2107 Marine waterproof stereo will work with our JENSEN MXA6BA powered subwoofer.
-
How long is the extension cable that connects the tuner/amp module to the wired commander?From Jim at 5/20/10 12:42 AMThe extension cable for the JENSEN MSR2107 Waterproof Marine Stereo is 10'.
-
Can I plug a microphone into the AUX IN and use in addition to the sound from the CD or radio as a karaoke machine?From Steve at 5/8/10 12:50 PMThough a microphone can be plugged into the AUX IN, it is not possible to mix the audio from the AUX IN and the other source modes. However, you may connect an external karaoke machine into the AUX IN for playback through the stereo system.
-
Does this system requires 4 or 8 ohm speakers?From Arend at 5/2/10 2:27 PMThe MSR2107 is designed to be used with 4-Ohm to 8-Ohm speakers. Use of speaker configurations outside of this range is not recommended.
-
Trying to clarify-- Is this unit 40w x4 or 50w x 4?From Matthew at 4/17/10 9:27 AMThis stereo is 50 watts per channel or 200 watts total (50 x 4).
-
Is this unit compatible with iPod Nano 5th Generation?From Chuck at 4/4/10 10:29 AMPlease see iPod Compatibility Bulletin at the following link: http://www.jensenrvdirect.com/downloads/dl/file/id/365/ipod_compatibility_guide.pdf If you are not sure which iPod you have, use the following link to identify it: http://support.apple.com/kb/HT1353
Media
-
JENSEN Floating Waterproof Wireless RF Remote
Sale:
Was:
Save: $14.11
