- Features
- Specs
- Manuals & Guides
- Testing
- Reviews
- FAQ
- Media
Features for the JENSEN AM/FM/CD/DVD/USB/iPod Ready Wallmount Stereo
- AM/FM/CD/DVD/USB/iPod Ready Wallmount Stereo
- 12 Volt DC Power
- 132 Watts (4 x 22.5W + 2 x 21W total)
- USB Input supports MP3/WMA/JPEG formats
- Front and Rear Auxiliary Audio Input
- 2 Composite Video Outputs
- 3 Zone (A, B, C) Speaker Output
- Front Panel Headphone Out (1/8" Jack)
- Audio AUX input on back accommodates TV audio
- Fully suspended slot-type DVD deck mechanism
- 30 Programmable Station Presets (18FM, 12AM)
- Clock with Sleep Timer
- Alarm Clock
- Low, medium and high adjustable LCD dimmer setting
- External IR repeater Input
- Full iPod audio control & charging (Requires JENSEN JIPDCBL12
iPod interface cable. Sold Separately.)
*iPod Compatibility Information: Please refer to this guide to see if your
iPod or iPhone is compatible with our JENSEN iPod Ready Stereos.
Not sure which iPod model you have? Click here to find out.
Specifications for the JENSEN AM/FM/CD/DVD/USB/iPod Ready Wallmount Stereo
| SKU |
RMAWM970IP |
|---|---|
| Weight (Lbs) |
8.7 |
| Overall Dimensions |
10-7/8 x 7 |
| Maximum Power Output (Watts x Channel) |
4 x 22.5W + 2 x 21W Total |
| Signal-to-Noise Ratio @ 1Watt/4 Ohms (dB) |
>75 |
| Mounting Hole Dimensions (Inches WxH) |
9-3/10 x 6-1/8 |
| Mounting Depth (Inches) |
5 |
| Watertight Standard Compliant |
No |
| Conformal Coated PCB |
No |
| Plastic PCB Insulator |
No |
| Chassis |
In-Wall |
| iPod Ready |
Yes |
| GEN 3 Sirius Satellite Radio Ready |
No |
| SiriusXM Satellite Radio Ready |
No |
| Wired Remote Control Ready |
Yes |
| Wireless Remote Control Ready |
Yes |
| Positive LCD Display |
Yes |
| CD/CD-R/CD-RW Playback |
Yes |
| MP3/WMA Playback |
Yes |
| AM/FM Tuner |
Yes |
| Selectable AM/FM Frequency Spacing US/European |
Yes |
| USB Input |
Yes |
| 1GB Onboard Memory |
No |
| Auxiliary Audio Input |
Yes |
| Preamp Line Level Outputs |
Yes |
| Electronic Disc Skip Protection (Seconds) |
DVD - 5, CD Audio - 15, CD MP3 - 40 |
| Radio Broadcast Data System Text Display |
No |
| Non-Volatile Memory for Presets & User Settings 2-Wire Power (Access ACC, GND) |
No |
| NOAA Weatherband/Weather Alert |
No |
| ASTM B117 Salt Spray Exposure Standard Compliant |
No |
| ASTM D4329 UV Exposure Standard Compliant |
No |
Manuals & Guides for the JENSEN AM/FM/CD/DVD/USB/iPod Ready Wallmount Stereo
Product Downloads
 |
AWM970 Owners Manual (Size: 3.2 MB) | |
|
AWM970 Quick Reference Guide (Size: 1.2 MB) |
Troubleshooting Guides
|
AWM970 Troubleshooting Guide (Size: 95.6 KB) |
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN Marine products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Marine Audio & Video products offer MORE durability and performance than you would expect from standard electronics.
Temperature/Vibration Chamber
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
DC Voltage Overstress
Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products: Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.
Reverse Polarity
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
Shorted I/O
Ensures that product will function when inputs and outputs are connected improperly to the product.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
Pushbutton/Hinge/Mechanism Durability Cycle
Life cycle robotic testing of all buttons and hinge mechanism for durability.
RF Performance Testing
RF performance is central to the user experience for many of our products. The RF Performance test ensures that our products keep clean signals in and the bad signals out, so that users are always left with a steady signal without outside interference. We not only test for high level RF performance during product design, but we also take a random sampling from each production lot and test it to ensure performance consistency. A battery of over 80 performance tests are conducted to analyze and validate RF and audio performance.
Product FAQs
-
How do I get sound from my TV to play through my AWM970?
You can connect the TV's AUDIO OUT to the AUX IN located on the rear of the AWM970. Depending on TV, you may need to turn the TV speakers OFF in the setup menu. Please refer to TV owner's manual. Click here
-
Does the AWM970 play in surround sound? Is it 5.1 compatible?The system incorporates three two-speaker zones (A, B & C). These are independent two-channel stereo outputs. The unit will not operate as a 5.1 surround sound system.
-
What do the A, B & C modes mean?This system incorporates three two-speaker zones (A, B & C). These allow you to turn the speaker zones ON/OFF as desired
-
My Sandisk Cruzer USB drive won't work on my AWM970. Why?There exists a compatibility issue with these USB drives. Place a DVD disc in the disc drive before inserting your Sandisk Cruzer USB drive and it will then be recognized correctly.
-
How do I view the iPod menu? It appears to be connected, but I can't operate it.The iPod menu and control is performed via on-screen menu from the AWM970 to your TV. Have your TV turned ON and to the input that your AWM970 is connected to in order to view the iPod menu.
-
My clock is in 24-hour mode, how do I get it to 12-hour mode?This would indicate that the radio is set to EUROPEAN tuner mode. Remove the unit form the wall and look for the switch on the rear near the disc drive area. Change the switch setting from EURO to USA. After making this switch, press the reset button, located on the front panel, near the DOLBY DIGITAL logo.
-
Can I add SIRIUS or XM to my AWM970?You can connect any stand alone SIRIUS or XM tuner unit to the AUX IN.
-
I plugged my MP3 player into the front AUX IN with a 1/8" stereo audio cable but I don't get any sound. Why?This is an A/V jack, not a standard audio-only jack. The AWM970 is supplied with a special Y-cable that converts the 1/8" A/V jack to A/V RCA jacks. You need to connect your MP3 player to the Y-cable.
-
The MWR100 does not show any information on the display when connected to my AWM97. Is the MWR100 compatable with the AWM970?The MWR100 is not comaptable with the AWM970. THE MWR75 or MRF27RTL are fully compatable with the AWM970.
-
Can I play Video from my iPod through the iPod input with the JIPDCBL cable?Video will not pass via the iPod dock connector through the JIPDCBL cable. Use of the iPod A/V cable (available through Apple) will be required. This will connect to the A/V Y-cable supplied with the AWM970 for connection to the front A/V Input.
-
What is the "PINK +12V Trigger wire" for?
This will provide turn-ON power to an external power amplifier or amplified antenna.
-
Where can I order replacement speaker grilles?Our JENSEN Marine speaker grilles are part of the complete speaker assembly and are not user replaceable.
-
When I insert a CD/DVD, it won't play and/or ejects immediately. What is wrong?
The shipping screw is most likely still installed. Inspect the area over the dsc drive and remove the transport screw if found.
-
My remote for my AWM970 will not work more than 6 or 7 feet away. Is there something I can try to extend my remote range?
If you are getting limited distance from your AWM970, try turning off any florescent lights you may have in your RV. The lights could be causing interference with the remote. Try a new battery in the remote, the battery could be weak which would cause limited distance. If you are at an angle from the radio, make sure the remote has a clear view of the IR Eye sensor on the radio. Even if the display is visible, the IR Eye might be obstructed. An IR Eye extension can also be connected to the AWM970 to give you more range from the remote. The part number for an IR extension and extra 25 foot extension is IRPMRPT06 and IREXT25.
