- Features
- Specs
- Manuals & Guides
- Testing
- Reviews
- FAQ
Features for the JENSEN 26" LCD TV with Stand
- Integrated HDTV (ATSC) Tuner
- HDTV Ready (1080p & 1080i))
- Easy to use convenient Front Controls
- Conformal Coated Circuit Boards to protect against corrosion and humidity
- Reinforced cabinet structure and mounting points to handle shock & vibration
- Table top stand included
- Dual function wireless remote controls included (TV/DVD)
- VESA 200mm x 400mm and 100mm x100mm Mounting Patterns
- RoHS Compliant
- IR repeater allows you to operate JENSEN DVD player with the dual full function wireless remote control
Specifications for the JENSEN 26" LCD TV with Stand
| Weight (Lbs) |
30.8 |
|---|---|
| Diagonal Screen Size (Inches) |
26 |
| Aspect Ratio |
16:9 |
| Resolution |
1366 x 768 |
| Brightness (cd/m2) |
500 nit |
| Contrast Ratio |
800:1 |
| Viewing Angles (V/H) |
176/176 |
| Speaker Audio Output |
7Wx2 |
| Power System |
110VAC |
| HDTV Built-in / Ready |
Built-in |
| Composite Video Input |
2 L/R NTSC/PAL Compatible |
| Composite Video Output |
1 |
| Component Video Input |
2 Y, Pb, Pr |
| S-Video Input |
No |
| VGA Video Input |
1 |
| HDMI Input |
2 |
| Line-Level Audio Output |
1 L/R Variable |
| SPDIF (Digital Audio Out-Coax) |
1 |
| IR Repeater |
Yes |
| Overall Dimensions (without stand) |
26.8"W x 18.7"H x 3.7"D |
| Overall Dimensions (with stand) |
26.8"W x 20.8"H x 3.7"D |
Manuals & Guides for the JENSEN 26" LCD TV with Stand
Product Downloads
| JE2608 Owners Manual (Size: 3.3 MB) | ||
| LCD TVs Quick Reference Guide (Size: 1.8 MB) |
Troubleshooting Guides
| JE2608WVRTL Troubleshooting Guide (Size: 89.4 KB) |
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN Marine products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Marine Audio & Video products offer MORE durability and performance than you would expect from standard electronics.
Temperature/Vibration Chamber
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
Electrostatic Discharge
The last thing you need is for your radio to quit due to accidental static shock. That’s why our products go through the extensive Electrostatic Discharge Test on all exposed control areas as well as I/O connections so they can withstand the most severe static build up. Shocking, isn’t it?
Load Dump
Severe electrical environments are relatively common mobile applications. We understand these environments and what it takes to protect electronics that will be exposed to them. That’s why all of our products include specific and significant front-end circuit protection and filtering that is proven to withstand the toughest electrical environments. The Load Dump Tests puts destructive pulses (spikes) to simulate the sudden disconnection of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction ensuring that our electronics are protected.
DC Voltage Overstress
Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products: Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.
Reverse Polarity
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
Shorted I/O
Ensures that product will function when inputs and outputs are connected improperly to the product.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
High/Low Storage Temperature
Ensures your JENSEN products will perform even after prolonged periods of storage with no power in extreme hot or cold temperatures.
Product FAQs
-
Since SIRIUS and XM merged, can I use XM tuners in place of SIRIUS tuners?While SIRIUS and XM have merged, they operate different broadcasts and are separate services. The tuners are not interchangeable.
-
My radio is SIRIUS-ready. Where do I find the ESN#?The ESN# (SID#) is located on the SIRIUS tuner (sold separately). This # can be accessed through the radio's display when connected to the SIRIUS tuner. See the radio's manual for instructions.
-
My radio says it is SIRIUS-ready. Why can't I get SIRIUS to work?SIRIUS-ready radios require a separate SIRIUS tuner module and SIRIUS antenna as well as a subscriptoin to SIRIUS Satellite Radio service.
-
What is the code for your TVs that will work with my DirecTV/Dish Network/Universal remote?Please see Universal Remote Control bulletin under Support tab.
-
The radio has four speaker outputs, but I only have two speakers. Can I combine or "bridge" the four outputs into two for more power?It is not recommended to combine or "bridge" the outputs as damage will occur. Use only the Front or Rear pair and insulate the unused wires to prevent a short. Use of an external power amplifier is recommended for applications requiring more power.
-
When I insert a CD/DVD, it won't play and/or ejects immediately. What is wrong?The shipping screw is most likely still installed. Inspect the area over the dsc drive and remove the transport screw if found.
