- Features
- Specs
- Manuals & Guides
- Testing
- Reviews
- FAQ
- Media
Features for the JENSEN Marine Stereo and SIRIUS Satellite Package
- AM/FM/iPod & SIRIUS Satellite Radio Ready Stereo with USB Input & 1GB of Onboard Memory
- 200 Watts
- USB Input supports MP3/WMA formats
- 1GB of Onboard Memory (250 Songs)
- Auxiliary Audio Input (RCA)
- Waterproof (IPX6 rated) Commander and Water Resistant AM/FM Tuner Amp.
- Wired Remote Ready (MWR75 and MWR100)
- Positive LCD Display
- Preamp Line Level Outputs
- Non-volatile memory for presets & user settings 2-wire power (ACC, GND)
- Conformal Coated PCB
- Plastic PCB Insulator
- Sealed Chassis
- ASTM B117 Salt Spray Exposure Standard Compliant
- ASTM D4329 UV Exposure Standard Compliant
- Overall Size of Commander Unit: 5.12"W x 3.7"H x 1.21"D
- Overall Size of Tuner/Amp Unit: 8.35"W x 7.97"D x 2.39"H
- Radio Broadcast Data System - Displays up to 5 lines of system text information when the selected FM station supports RBDS (Radio Broadcast Data System) service.
- Low Battery Audible Warning - A low voltage audible warning will alert you when voltage is low. Station presets and Marine Stereo settings are written to a memory chip and maintained when power feed is disconnected.
- Zero Current Memory Draw - This stereo does not require a constant battery standby power feed which means the stereo keeps station presets without running the battery down.
- Full iPod Controls - When you plug your iPod into your new Marine Stereo you can fully control the iPod using the stereo controls - no need to fumble around with your iPod while boating; now it can stay protected and out of the way.
NOTE: JIPDCBL12 iPod Adapter Cable required. Sold separately.
*iPod Compatibility Information: Please refer to this guide to see if your
iPod or iPhone is compatible with our JENSEN iPod Ready Stereos.
Not sure which iPod model you have? Click here to find out.
PACKAGE INCLUDES:
MSR2107 - Waterproof AM/FM/iPod & SIRIUS Satellite Radio Ready Stereo
DLP2500G3RTL - SIRIUS Satellite Radio Tuner
JIPDCBL12 - iPod Interface Cable
jPort - 1/8" Auxiliary Input Jack
SRA25B - SIRIUS Satellite Antenna
1011668 - SIRIUS Data Cable
8309819 - 6' Soft Wire Antenna
NOTE: SIRIUS Satellite subscription required to receive a SIRIUS Satellite signal. Not Included.
To subscribe to the SIRIUS service call toll-free at 1-888-539-SIRIUS
or click here to visit their website.
Specifications for the JENSEN Marine Stereo and SIRIUS Satellite Package
| Weight (Lbs) |
9.6 |
|---|---|
| Overall Dimensions |
5-1/8 x 3-3/4 |
| Maximum Power Output (Watts x Channel) |
50 x 4 |
| Signal-to-Noise Ratio @ 1Watt/4 Ohms (dB) |
N/A |
| Mounting Hole Dimensions (Inches WxH) |
3/4 |
| Mounting Depth (Inches) |
N/A |
| Watertight Standard Compliant |
Yes |
| Conformal Coated PCB |
Yes |
| Plastic PCB Insulator |
Yes |
| Chassis |
Sealed |
| iPod Ready |
Yes |
| Gen3.0 SIRIUS Satellite Radio Ready |
Yes |
| Wired Remote Control Ready |
Yes |
| Wireless Remote Control Ready |
Yes |
| Positive LCD Display |
No |
| CD/CD-R/CD-RW Playback |
No |
| MP3/WMA Playback |
No |
| AM/FM Tuner |
Yes |
| Selectable AM/FM Frequency Spacing US/European |
Yes |
| USB Input |
Yes |
| 1GB Onboard Memory |
Yes |
| Auxiliary Audio Input |
Yes |
| Preamp Line Level Outputs |
Yes |
| Electronic Disc Skip Protection (Seconds) |
N/A |
| Radio Broadcast Data System Text Display |
No |
| Non-Volatile Memory for Presets & User Settings 2-Wire Power (Access ACC, GND) |
Yes |
| NOAA Weatherband/Weather Alert |
No |
| ASTM B117 Salt Spray Exposure Standard Compliant |
Yes |
| ASTM D4329 UV Exposure Standard Compliant |
Yes |
Manuals & Guides for the JENSEN Marine Stereo and SIRIUS Satellite Package
Product Downloads
| Commander Mounting Template (Size: 33.9 KB) | ||
| iPod Compatibility Guide (Size: 56.9 KB) | ||
| MSR2107 Commander Mounting Template (Size: 37.8 KB) | ||
| MSR2107 Owners Manual (Size: 7 MB) | ||
| What does iPod Ready Really Mean? (Size: 602.5 KB) | ||
| What does SIRIUS Satellite Radio Ready Really Mean? (Size: 758.7 KB) |
Troubleshooting Guides
| MSR2107 Troubleshooting Guide (Size: 88.8 KB) |
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN Marine products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Marine Audio & Video products offer MORE durability and performance than you would expect from standard electronics.
Temperature/Vibration Chamber
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
UV/Salt Fog Corrosive Exposure Chamber
Exterior components are subjected to accelerated UV exposure that equates to 5-7 years of actual outdoor exposure to assure you that your electronics will look great for many years. In addition, product and product components are subjected to dry/wet cycles of highly corrosive fog/mist to test for corrosion resistance and corrosion protection effectiveness.
Electrostatic Discharge
The last thing you need is for your radio to quit due to accidental static shock. That’s why our products go through the extensive Electrostatic Discharge Test on all exposed control areas as well as I/O connections so they can withstand the most severe static build up. Shocking, isn’t it?
Load Dump
Severe electrical environments are relatively common mobile applications. We understand these environments and what it takes to protect electronics that will be exposed to them. That’s why all of our products include specific and significant front-end circuit protection and filtering that is proven to withstand the toughest electrical environments. The Load Dump Tests puts destructive pulses (spikes) to simulate the sudden disconnection of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction ensuring that our electronics are protected.
DC Voltage Overstress
Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products: Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.
Reverse Polarity
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
Shorted I/O
Ensures that product will function when inputs and outputs are connected improperly to the product.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
High/Low Storage Temperature
Ensures your JENSEN products will perform even after prolonged periods of storage with no power in extreme hot or cold temperatures.
Temperature Cycle
Used to ensure powered components withstand temperature fluctuations.
High-Pressure Spray
Subjects externally mounted products to high pressure water by blasting the product with 13,000 lbs. of water pressure as close as 6 inches to the product.
Pushbutton/Hinge/Mechanism Durability Cycle
Life cycle robotic testing of all buttons and hinge mechanism for durability.
RF Performance Testing
RF performance is central to the user experience for many of our products. The RF Performance test ensures that our products keep clean signals in and the bad signals out, so that users are always left with a steady signal without outside interference. We not only test for high level RF performance during product design, but we also take a random sampling from each production lot and test it to ensure performance consistency. A battery of over 80 performance tests are conducted to analyze and validate RF and audio performance.
Inductive Load Switching
Tests product well above and below the average waveform to ensure that it can withstand the extreme fluctuations.
Product FAQs
-
The radio has four speaker outputs, but I only have two speakers. Can I combine or "bridge" the four outputs into two for more power?
It is not recommended to combine or "bridge" the outputs as damage will occur. Use only the Front or Rear pair and insulate the unused wires to prevent a short. Use of an external power amplifier is recommended for applications requiring more power.
Questions about the JENSEN Marine Stereo and SIRIUS Satellite Package
Ask a Tech Expert Your Question:
-
Is it mandatory to hook up 4 speakers or will the radio function with just 2 speakers? If so are there any special instructions?From Thomas at 6/8/10 6:25 PMIt is possible to use only 2 speakers. Use only the Front or Rear pair and insulate the unused wires to prevent a short. It is not recommended to combine or "bridge" the outputs as damage will occur. Use of an external power amplifier is recommended for applications requiring more power.
-
Can I connect a subwoofer to this? Which wires would I hook the sub to (or the amp)? Which amp would you recommend?From Gareth at 5/28/10 9:41 PMYou can use the AUDIO OUT connections to supply signal to an external amplifier or powered subwoofer. For optimum performance, I would recommend our JENSEN POWER400 amplifier and JENSEN MSW10S Marine Subwoofer. For easiest installation, I would recommend our JENSEN MXA6BA Marine Powered Subwoofer.
-
Can I bridge two 50 watt channels together to make a 100 watt channel that I can then put a 100 watt speaker on? I only want 2 100 watt channels so I can hook up 2 100 watt speakers for my Sea Doo GTI Jet Ski. It needs it to be really loud so I can hear it at a high speed.From Vance at 5/12/10 6:40 PMYou cannot bridge the output channels, as damage to the radio will occur. If you need more power than the radio can provide, you will need to add an external amplifier, such as our POWER760.
-
Do you still have to have a SIRIUS dock and play radio & vehicle kit hooked up to this radio to have SIRIUS ? We are trying to get a SIRIUS radio in our boat.From Jana at 5/8/10 1:06 PMIt is not necessary to use a SIRIUS universal dock-n-play tuner / vehicle kit with the MSR2107. The MSR2107SIR is a radio package that includes the direct connect SIRIUS tuner and SIRIUS antenna. No other items are required in order to receive SIRIUS programming. The SIRIUS tuner will need to be activated with a subscription in order to receive programming.
