- Features
- Specs
- Manuals & Guides
- Testing
- Reviews
- FAQ
Features for the JENSEN Remanufactured AM/FM/CD Marine Stereo
- 2-Wire power (ACC, Gnd.)
- White color faceplate
- Euro-DIN (sleeve-mount) chassis design
- UV-Resistant front panel
- Conformal coated circuit boards
- Solid top chassis
- Non-absorbing PCB insulator
- Electronic AM/FM tuner (US)
- Station presets (18FM, 6AM)
- Auto-Store (AS)
- Preset Scan (PS)
- Single CD player (CD-R/RW compatible)
- 10 Second CD ESP (Electronic Skip Protection)
- Stereo Aux audio input (3.5mm Front jack)
- Blue LED illumination
- Audio mute
- Loudness
- Stereo pre-amp audio output
- 4x40W Output power
- Overall Dimensions: 7-1/2"W x 2-1/4"H x 8-1/4"D
- 30 Day Warranty
Specifications for the JENSEN Remanufactured AM/FM/CD Marine Stereo
| Weight (Lbs) |
4.6 |
|---|---|
| Overall Dimensions |
7-1/2"W x 2-1/4"H x 8-1/4"D |
| Maximum Power Output (Watts x Channel) |
40 x 4 |
| Signal-to-Noise Ratio @ 1Watt/4 Ohms (dB) |
>65 |
| Mounting Hole Dimensions (Inches WxH) |
7-1/4 x 2 |
| Mounting Depth (Inches) |
6-1/2 |
| Watertight Standard Compliant |
No |
| Conformal Coated PCB |
Yes |
| Plastic PCB Insulator |
Yes |
| Chassis |
Solid Top |
| iPod Ready |
No |
| Gen3.0 SIRIUS Satellite Radio Ready |
No |
| Wired Remote Control Ready |
No |
| Wireless Remote Control Ready |
No |
| Positive LCD Display |
Yes |
| CD/CD-R/CD-RW Playback |
Yes |
| MP3/WMA Playback |
No |
| AM/FM Tuner |
Yes |
| Selectable AM/FM Frequency Spacing US/European |
No |
| USB Input |
No |
| 1GB Onboard Memory |
No |
| Auxiliary Audio Input |
No |
| Preamp Line Level Outputs |
Yes |
| Electronic Disc Skip Protection (Seconds) |
10 |
| Radio Broadcast Data System Text Display |
No |
| Non-Volatile Memory for Presets & User Settings 2-Wire Power (Access ACC, GND) |
Yes |
| NOAA Weatherband/Weather Alert |
No |
| ASTM B117 Salt Spray Exposure Standard Compliant |
No |
| ASTM D4329 UV Exposure Standard Compliant |
No |
Manuals & Guides for the JENSEN Remanufactured AM/FM/CD Marine Stereo
Product Downloads
| MCD5070 Owners Manual (Size: 2.4 MB) |
Troubleshooting Guides
| MCD5070 Troubleshooting Guide (Size: 84.4 KB) |
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN Marine products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Marine Audio & Video products offer MORE durability and performance than you would expect from standard electronics.
Temperature/Vibration Chamber
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
UV/Salt Fog Corrosive Exposure Chamber
Exterior components are subjected to accelerated UV exposure that equates to 5-7 years of actual outdoor exposure to assure you that your electronics will look great for many years. In addition, product and product components are subjected to dry/wet cycles of highly corrosive fog/mist to test for corrosion resistance and corrosion protection effectiveness.
Electrostatic Discharge
The last thing you need is for your radio to quit due to accidental static shock. That’s why our products go through the extensive Electrostatic Discharge Test on all exposed control areas as well as I/O connections so they can withstand the most severe static build up. Shocking, isn’t it?
Load Dump
Severe electrical environments are relatively common mobile applications. We understand these environments and what it takes to protect electronics that will be exposed to them. That’s why all of our products include specific and significant front-end circuit protection and filtering that is proven to withstand the toughest electrical environments. The Load Dump Tests puts destructive pulses (spikes) to simulate the sudden disconnection of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction ensuring that our electronics are protected.
DC Voltage Overstress
Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products: Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.
Reverse Polarity
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
Shorted I/O
Ensures that product will function when inputs and outputs are connected improperly to the product.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
High/Low Storage Temperature
Ensures your JENSEN products will perform even after prolonged periods of storage with no power in extreme hot or cold temperatures.
Temperature Cycle
Used to ensure powered components withstand temperature fluctuations.
High-Pressure Spray
Subjects externally mounted products to high pressure water by blasting the product with 13,000 lbs. of water pressure as close as 6 inches to the product.
Pushbutton/Hinge/Mechanism Durability Cycle
Life cycle robotic testing of all buttons and hinge mechanism for durability.
RF Performance Testing
RF performance is central to the user experience for many of our products. The RF Performance test ensures that our products keep clean signals in and the bad signals out, so that users are always left with a steady signal without outside interference. We not only test for high level RF performance during product design, but we also take a random sampling from each production lot and test it to ensure performance consistency. A battery of over 80 performance tests are conducted to analyze and validate RF and audio performance.
Inductive Load Switching
Tests product well above and below the average waveform to ensure that it can withstand the extreme fluctuations.
Reviews for the JENSEN Remanufactured AM/FM/CD Marine Stereo
Customer Reviews
-
Good for Price
Rating Everything seems to work well, especially for the price!
Questions about the JENSEN Remanufactured AM/FM/CD Marine Stereo
Ask a Tech Expert Your Question:
-
My CD will not insert fully into the disc drive and is stuck.From Blair at 5/17/10 4:39 PMIf the CD will not fully insert into the disc drive, verify that the shipping screws that are installed in the top of the stereo have been removed. These screws are used as extra protection during shipment, but must be removed to allow a CD to play. To eject the CD, try resetting the CD either by the reset button on the front of the stereo or by removing the power from the radio for a few minutes and then reconnecting.
-
Is this unit water proof? Or do I need something else in order to make it waterproof?From Alex at 5/3/10 3:54 PMThis radio is not waterproof, due to the exposed CD slot, and must be protected from direct water contact. Use of our marine radio housings will provide sufficient protection and waterproofing.
