- Features
- Specs
- Manuals & Guides
- Testing
- Reviews
- FAQ
- Media
Features for the JENSEN Waterproof AM/FM/CD/MP3/WB/iPod and SIRIUS Satellite Radio Ready Marine Stereo
- AM/FM/CD/MP3/WB/iPod & SIRIUS Satellite Radio Ready Marine Stereo
- 200 Watts
- Full Dot Matrix Display
- Auxiliary Audio Input (RCA)
- Waterproof (IPX6 rated)
- Wired Remote Ready (MWR75 and MWR100)
- Positive LCD Display
- Preamp Line Level Outputs
- 40 Seconds of Electronic CD Skip Protection
- Non-volatile memory for presets & user settings 2-wire power (ACC, GND)
- Conformal Coated PCB
- Plastic PCB Insulator
- Sealed Chassis
- ASTM B117 Salt Spray Exposure Standard Compliant
- ASTM D4329 UV Exposure Standard Compliant
- Radio Broadcast Data System - Displays up to 5 lines of system text information when the selected FM station supports RBDS (Radio Broadcast Data System) service.
- Low Battery Audible Warning - A low voltage audible warning will alert you when voltage is low. Station presets and Marine Stereo settings are written to a memory chip and maintained when power feed is disconnected.
- Zero Current Memory Draw - This stereo does not require a constant battery standby power feed which means the stereo keeps station presets without running the battery down.
- Full iPod Controls - When you plug your iPod into your new Marine Stereo you can fully control the iPod using the stereo controls - no need to fumble around with your iPod while boating; now it can stay protected and out of the way.
NOTE: JIPDCBL12 iPod Adapter Cable required. Sold separately.
*iPod Compatibility Information: Please refer to this guide to see if your
iPod or iPhone is compatible with our JENSEN iPod Ready Stereos.
Not sure which iPod model you have? Click here to find out.
Generation 3.0 SIRIUS Technology: Allows a SIRIUS Dock & Play unit to act as the satellite radio receiver. This eliminates the need for a separate SIRIUS tuner box! Simply put the Dock & Play into its docking station and listen to SIRIUS radio with full functionality and control through the stereo head unit. It also means that your SIRIUS tunes are completely portable. Your favorite SIRIUS stations don't have to remain strictly in your equipment. Now you can take the SIRIUS Dock & Play unit out of your equipment and use it in your car and home, all under ONE single SIRIUS subscription! (not included). We know you just have to have this now, right? Check out the SDSV6V1 SIRIUS Dock & Play Radio and Vehicle Kit!
NOTE: If you want to take advantage of the SIRIUS Satellite Radio Ready feature you will need:
- SIRIUS Satellite Radio Subscription
- DLP2500G3RTL - SIRIUS Satellite Gen 3.0 Receiver. Compatible with All Stereo Revisions.
- SRA25 - SIRIUS Satellite Antenna
To subscribe to the SIRIUS service call toll-free at 1-888-539-SIRIUS
or click here to visit their website.
Specifications for the JENSEN Waterproof AM/FM/CD/MP3/WB/iPod and SIRIUS Satellite Radio Ready Marine Stereo
| Weight (Lbs) |
5.7 |
|---|---|
| Overall Dimensions |
8-2/3 x 3-2/3 |
| Maximum Power Output (Watts x Channel) |
50 x 4 |
| Signal-to-Noise Ratio @ 1Watt/4 Ohms (dB) |
>75 |
| Mounting Hole Dimensions (Inches WxH) |
7-1/4 x 2 |
| Mounting Depth (Inches) |
6-7/8 |
| Watertight Standard Compliant |
Yes |
| Conformal Coated PCB |
Yes |
| Plastic PCB Insulator |
Yes |
| Chassis |
Sealed |
| iPod Ready |
Yes |
| Gen3.0 SIRIUS Satellite Radio Ready |
Yes |
| Wired Remote Control Ready |
Yes |
| Wireless Remote Control Ready |
Yes |
| Positive LCD Display |
Yes |
| CD/CD-R/CD-RW Playback |
Yes |
| MP3/WMA Playback |
Yes |
| AM/FM Tuner |
Yes |
| Selectable AM/FM Frequency Spacing US/European |
Yes |
| USB Input |
No |
| 1GB Onboard Memory |
No |
| Auxiliary Audio Input |
Yes |
| Preamp Line Level Outputs |
Yes |
| Electronic Disc Skip Protection (Seconds) |
40 |
| Radio Broadcast Data System Text Display |
Yes |
| Non-Volatile Memory for Presets & User Settings 2-Wire Power (Access ACC, GND) |
Yes |
| NOAA Weatherband/Weather Alert |
Yes |
| ASTM B117 Salt Spray Exposure Standard Compliant |
Yes |
| ASTM D4329 UV Exposure Standard Compliant |
Yes |
Manuals & Guides for the JENSEN Waterproof AM/FM/CD/MP3/WB/iPod and SIRIUS Satellite Radio Ready Marine Stereo
Product Downloads
| iPod Compatibility Guide (Size: 470.6 KB) | ||
| MSR7007 Owners Manual (Size: 4.2 MB) | ||
| MSR7007 Quick Reference Guide (Size: 1.1 MB) | ||
| What does iPod Ready Really Mean? (Size: 602.5 KB) | ||
| What does SIRIUS Satellite Radio Ready Really Mean? (Size: 758.7 KB) |
Troubleshooting Guides
| MSR7007 Troubleshooting Guide (Size: 93.7 KB) |
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN Marine products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Marine Audio & Video products offer MORE durability and performance than you would expect from standard electronics.
Temperature/Vibration Chamber
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
UV/Salt Fog Corrosive Exposure Chamber
Exterior components are subjected to accelerated UV exposure that equates to 5-7 years of actual outdoor exposure to assure you that your electronics will look great for many years. In addition, product and product components are subjected to dry/wet cycles of highly corrosive fog/mist to test for corrosion resistance and corrosion protection effectiveness.
Electrostatic Discharge
The last thing you need is for your radio to quit due to accidental static shock. That’s why our products go through the extensive Electrostatic Discharge Test on all exposed control areas as well as I/O connections so they can withstand the most severe static build up. Shocking, isn’t it?
Load Dump
Severe electrical environments are relatively common mobile applications. We understand these environments and what it takes to protect electronics that will be exposed to them. That’s why all of our products include specific and significant front-end circuit protection and filtering that is proven to withstand the toughest electrical environments. The Load Dump Tests puts destructive pulses (spikes) to simulate the sudden disconnection of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction ensuring that our electronics are protected.
DC Voltage Overstress
Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products: Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.
Reverse Polarity
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
Shorted I/O
Ensures that product will function when inputs and outputs are connected improperly to the product.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
High/Low Storage Temperature
Ensures your JENSEN products will perform even after prolonged periods of storage with no power in extreme hot or cold temperatures.
Temperature Cycle
Used to ensure powered components withstand temperature fluctuations.
High-Pressure Spray
Subjects externally mounted products to high pressure water by blasting the product with 13,000 lbs. of water pressure as close as 6 inches to the product.
Pushbutton/Hinge/Mechanism Durability Cycle
Life cycle robotic testing of all buttons and hinge mechanism for durability.
RF Performance Testing
RF performance is central to the user experience for many of our products. The RF Performance test ensures that our products keep clean signals in and the bad signals out, so that users are always left with a steady signal without outside interference. We not only test for high level RF performance during product design, but we also take a random sampling from each production lot and test it to ensure performance consistency. A battery of over 80 performance tests are conducted to analyze and validate RF and audio performance.
Inductive Load Switching
Tests product well above and below the average waveform to ensure that it can withstand the extreme fluctuations.
Reviews for the JENSEN Waterproof AM/FM/CD/MP3/WB/iPod and SIRIUS Satellite Radio Ready Marine Stereo
Product FAQs
-
Since SIRIUS and XM merged, can I use XM tuners in place of SIRIUS tuners?While SIRIUS and XM have merged, they operate different broadcasts and are separate services. The tuners are not interchangeable.
-
I have SIRIUS Marine Weather in my boat. Can I use that with my JENSEN Marine SIRIUS-ready radio?SIRIUS Weather is a separate service from SIRIUS Radio programming. These devices are not compatible with JENSEN Marine SIRIUS-ready radios in a Direct Connect fashion. JENSEN Marine SIRIUS-ready radios require a dedicated SIRIUS Radio tuner for Direct Connect capability. You may connect the audio out from your SIRIUS Marine Weather device to your JENSEN Marine radio's Auxiliary Input.
-
My radio is SIRIUS-ready. Where do I find the ESN#?The ESN# (SID#) is located on the SIRIUS tuner (sold separately). This # can be accessed through the radio's display when connected to the SIRIUS tuner. See the radio's manual for instructions.
-
My radio says it is SIRIUS-ready. Why can't I get SIRIUS to work?SIRIUS-ready radios require a separate SIRIUS tuner module and SIRIUS antenna as well as a subscriptoin to SIRIUS Satellite Radio service.
-
This radio has one pair of RCA cables on the rear. Is this an AUX Input?The rear RCA cables are an audio output. The AUX IN is located on the front of the MSR3007RTL.
-
What enclosure do I need for this radio? I can't find one that fits?When properly installed, the MSR7007 is a fully waterproof model. It is intended for the front face to be exposed to water contact. As such, no marine radio enclosure is required.
-
The radio has four speaker outputs, but I only have two speakers. Can I combine or "bridge" the four outputs into two for more power?It is not recommended to combine or "bridge" the outputs as damage will occur. Use only the Front or Rear pair and insulate the unused wires to prevent a short. Use of an external power amplifier is recommended for applications requiring more power.
-
When I insert a CD/DVD, it won't play and/or ejects immediately. What is wrong?
The shipping screw is most likely still installed. Inspect the area over the dsc drive and remove the transport screw if found.
Questions about the JENSEN Waterproof AM/FM/CD/MP3/WB/iPod and SIRIUS Satellite Radio Ready Marine Stereo
Ask a Tech Expert Your Question:
-
What colors does the unit come in?From Dennis at 6/8/10 5:05 PMThe JENSEN MSR7007 Marine Stereo is currently available in a SILVER finish w/BLUE LCD display only.
-
Does the MSR7007 have any RCA audio outputs for connection to an amplifier?From LWOOD at 5/17/10 4:35 PMThe JENSEN Marine stereo MSR7007 has one pair of rear-mounted RCA audio outputs.
-
If this unit does not have a USB input, How will it be able to control an mp3 player?From Eric at 4/27/10 7:57 PMThe MSR7007 will play MP3 files that are stored on CD-R's. You may also connect your MP3 player to the Auxiliary Input. The MSR7007 will allow playback and control of compatible iPods/iPhones with the JIPDCBL-series interface adapter.
